Angora

Angora wool or Angora fibre refers to the downy coat produced by the Angora rabbit. While their names are similar, Angora fibre is distinct from mohair, which comes from the Angora goat. Angora fibre is also distinct from cashmere, which comes from the cashmere goat. Angora is known for its softness, thin fibres,an angora rabbit and what knitters refer to as a halo fluffiness. It isangora also known for its silky texture. It is much warmer and lighter than wool due to the hollow core of the angora fibre. It also gives them their characteristic floating feel.

Angora rabbits produce coats in a variety of colours, from white through tan, grey, and brown to black. Good quality Angora fibre is around 12-16 micrometres in diameter, and can cost around $ 10 - 16 per ounce 35 to 50 cents/gram. It felts very easily, even on the animal itself if it is not groomed frequently.

Yarns of 100% angora are typically used as accents. They are quite striking, visually appearing and to the touch feeling, similar to fur. They have the most halo and warmth, but can felt very easily through abrasion and humidity and can be excessively warm in a finished garment. The fibre is normally blended with wool to give the yarn elasticity, as Angora fibre is not naturally elastic. The blend decreases the softness and halo as well as the price of the finished object. Commercial knitting yarns typically use 30-50% angora, in order to produce some halo, warmth, and softness without the side effects of excessive felting.

The Angora rabbit

There are four different ARBA recognized types of Angora rabbit: English, French, Satin and Giant. There are many other breeds, one of the more common being German. Each breed produces different quality and quantity of fibre, and has a different range of colours.

Fur production

Angora fur is produced in Europe, Chile, China and the United States. Harvesting occurs up to three times a year about every 4 months and is collected by plucking, shearing, or collection of the moulting fur.

Most breeds of Angora rabbits moult with their natural growth cycle about every four months. Many producers of the fibre pluck the fur of these breeds. Plucking is, in effect, pulling out the moulted fur. Plucking ensures a minimum of guard hair, and the fur is not as matted when plucked as when it is collected from the rabbit's cage. However, plucking a rabbit is time consuming, so some producers shear the rabbit instead. While this results in slightly lower quality fleece, as the guard hairs are included, it does take less time and results in more fleece. Also, not all breeds of Angora moult, and if the rabbit does not naturally moult, it cannot be plucked. German Angoras do not moult.

The rabbits must be groomed at least once or twice a week to prevent the fur from matting and felting. There is also a danger a rabbit will ingest its own moulted fur; unlike a cat, a rabbit cannot easily be rid of the build-up.

Quality of wool

The premium first quality wool is taken from the back and upper sides of the rabbit. This is usually the longest and cleanest fibre on the rabbit. There should not be hay or vegetable matter in the fibre. Second quality is from the neck and lower sides, and may have some vegetable matter. Third quality is the buttocks and legs and any other areas that easily felt and are of shorter length. Fourth quality is totally unsalvageable, and consists of the larger felted bits or stained fibre. Third and fourth quality are perfect for cutting up for the birds to use in lining their nests. With daily brushing, felting of the fibre can be avoided, increasing the usable portion of fibre.

Uses

Angora wool is commonly used in apparel such as sweaters and suiting’s, knitting yarn, and felting.

Copyright © 2017 whorldropspindle